Caliber MCD-263 Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильный приемник Caliber MCD-263. Caliber MCD-263 19 страниц. Cd/mp3 car radio with rds function
Печатать страницу
searches AF. The unit doesn't search this
AF (DIP) for few minutes. In the case of the
AF of NO RDS signal with high field
strength, if the real AF is wrongly masked
as DIP by some interference, the unit
hesitates to search real AFs. For this
reason, the unit has the user option (MASK
DPI) which doesn't mask the AF of NO RDS
signal with high field strength. In MASK DPI
mode, the wrong sound or long mute
(according to PI SOUND or PI MUTE) can
be heard from the AF station which has NO
RDS signal and of which the field strength is
higher than that of the currently tuning AF
(station). But, these phenomenons are rare
and the user will hardly hear the wrong
sound in whole Europe.
- MASK DPI mode:
Mask only the AF which has different PI.
- MASK ALL mode:
Mask the AF which has different PI and
NO RDS signal with high field strength.
BEEP 2'ND/ALL/OFF
- BEEP 2'ND mode:
The beep is only heard when the second
function of the dual function button is
pressed long (2 sec). e.g.
When
PRESET
When
BND/LOU
When
AMS/MP3
When
button is pressed.
When
button is pressed.
- BEEP ALL mode:
The beep sound is heard when every key
is pressed.
- BEEP OFF mode:
The beep is disabled.
Loudness Function
Press the
BND/LOUD
reinforce the bass output. Press it for a few
seconds again to cancel the function.
INFORMATION DISPLAY
Press
DISP
button to operate as the
conversion of each display mode as
follows:
- In case of receiving a RDS station
In radio mode: PS ->CT ->FREQ ->PTY
In CDP mode:CDP ->CT ->(ID3 TAG) -
>PS ->FREQ ->PTY
* In case of no receiving CT or PTY
Information, the display shows as "NO
CLOCK" or "NO PTY".
button(
1-6
) is pressed.
button is pressed.
button is pressed.
for 2 seconds to
- In case of receiving a non RDS station
In radio mode: "NO CLOCK" ->FREQ-
>"NO PTY"
In CD mode:CD -> NO CLOCK -> FREQ -
> "NO PTY"
Each displaying time is several seconds,
and come back to 1'st position after several
seconds.
Notes:
CT = clock time
Equalization
Press the
EQ
button to turn on the
equalization function and to select desired
audio mode. There are four kinds of mode
as below:
To select playback mode
In power on mode, press
repeatedly to select the different modes as
the following sequence: RADIO, DISC (with
a CD/MP3/WMA disc inside the disc slot) ,
USB(with a USB device inside the USB
port), SD card(with a card inside the card
slot) or AUX mode.
LCD DISPLAY
Exhibit current frequency and activated
functions on the LCD display.
FLASHING LED
The led display will flash if the front panel is
not inserted into the main unit.
ESP FUNCTION
This unit has the electronic shockproof
feature. So that if the unit skips due to rough
road conditions, the playback of the disc /
USB / SD will be uninterrupted.
TEL Mute
The audio system automatically mutes
whenever a call comes in.
Note: the function will not work if a cable is
not connected to the car phone.
1. When a call comes in
When a call is received, 'TEL CALL' is
displayed and all the unit functions are
temporarily interrupted.
FREQ = frequency.
MODE
button