Directechs DB3 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильная электроника Directechs DB3. Directechs DB3 17 страниц. 2011 subaru outback - 403.subaru2 1.25
Также для Directechs DB3: Руководство по установке (20 страниц), Руководство по установке (19 страниц), Руководство по установке (19 страниц), Руководство по установке (20 страниц), Руководство по установке (10 страниц)

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

For

Convenience-Only

programming, see next section.

Ensure vehicle is in a safe location and cannot move forward during programming.

The harnesses must be connected in this exact order:

Connect the 14-pin.

Connect the 12-pin.

Connect the 10-pin.

When the LED turns on solid red, proceed with the next step.

Do not depress the Brake pedal.

Press the Push-To-Start (PTS) button twice (2x) to turn the ignition ON.

The LED flashes green.

Wait for the bypass to program (it may flash for up to 30 seconds).

The LED will turn ON solid green for 3 seconds, then shuts OFF.

Press the PTS button one time (1x) more to turn the ignition OFF.

You have successfully completed the module programming sequence.

403.MA3 2.42.104 2014 Mazda 3 (Smart Key)