Caliber RCD-120BT/B Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Автомобильный приемник Caliber RCD-120BT/B. Caliber RCD-120BT/B 11 страниц.

Печатать страницу

RCD 120BT(/B) • MANUAL

SPECIFICATION

General

Power Supply Requirements:

Load Impedance

Maximum Output Power:

Chassis Dimensions:

Current Drain:

Tone Controls

Bass (at 100Hz):

Treble (at 10K):

CD Player

Signal to Noise Ratio:

Channel Separation:

Frequency Response:

FM Radio

Frequency Coverage (MHz):

IF :

Sensitivity (S/N-30dB):

Stereo Separation:

Remarks

Specifications subject to change without notice

Bluetooth Freq range: 2402-2480 Mhz

Max e.r.p: <100mW/20dBm

DC 14

4V"

", Negative Ground

4 ohms

75W x 4( CH)

178 x 163x 50mm (W x D x H)

10A

+10dB / -10dB

More than 60dB

20Hz - 20KHz

5 - 108MHz

10.7MHz

12dBu

>30dB

RCD 120BT(/B) • MANUAL

BEFORE PLAYING DISCS

Cleaning the CD

Before playing a CD, wipe it off with a clean, dust-free cleaning cloth.

Wipe the disc in the direction of the arrow.

Always insert the CD with the label side facing upwards.

If the CD is inserted with the printed side facing downwards, the device

may be damaged.

Note: If there is already a CD in the CD slot , do not try to insert a second

CD. This may damage the device.

Always hold CDs by the edge. In order to keep the CD clean do not touch

the surface. Pull out the CD as follows.

Do not attach any sticker or adhesive tape on the CD.

Do not expose the CD to direct sunlight or sources of heating.

Do not leave CDs in a car if it parked in direct sunlight as that will lead to

a considerable rise in the temperature inside the car.

Note: Do not use any solvents such as petrol or thinning agents. Commercially

available cleaning substances of antistatic spray will damage the device.