Directed 403.SUBARU11 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Directed 403.SUBARU11. Directed 403.SUBARU11 19 страниц.

Pre-installation and application warnings

This section highlights important information for this specific firmware and will assist in pricing accordingly, as

START

HERE

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

T-Harness is not compatible.

compatible

Vehicle Takeover

Firmware notes

Important!

All doors must be closed and locked prior to remote start.

Smart Door handles and OEM remotes: Not functional during runtime.

Autolights: They may take up to 30 seconds to shut off.

Takeover: To successfully perform a takeover, the driver's door must be closed before depressing the brake.

Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the Vehicle connections section for more information.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin, or if

not supported in data.

[2] Tach wire: An optional connection required on some remote starters, which do not support a tach signal in D2D.

[3] Immobilizer interface: Refer to the Immobilizer interface section for more information about the key wrap.

[4] Brake wire: May not be present on certain trim levels. If that is the case, use the alternative brake wire.

403.SUBARU11 1.06 2022 Subaru Outback (Smart Key)

Refer to the Quick Reference Guide section for more details.

Keys

Keys required

required for

for operation

programming