Supplied/Required/Optional Items
SUPPLIED PARTS (ILLUSTRATED BELOW)
A. (1) Tactile Sound Transducer
B. (1) Unimount Bracket
C. (1) 3/8"-16 x 3" Hanger Bolt
D. (1) 3/8"-16 x 3" Threaded Stud
(1) 3/8"-16 x 1.5" Threaded Stud
E.
F.
(1) 3/8"-16 x 1" Hex Bolt
G.
(4) #12 x 1" Screw
H.
(2) 3/8" Nut
I.
(4) #12 Washer
(4) #12 Lock Washer
J.
K. (1) 3/8" Washer
(1) 3/8" Lock Washer
L.
(1) T-Nut
M.
• Installation Guide
A
F
G
C
D
E
REQUIRED AUDIO COMPONENTS
• Power amplifier:
...for the TST239, rated between 75 and 125 watts @ 4 ohms.
...for the TST329, TST429, and AW339, rated between 125 and 150 watts @ 4 ohms.
OPTIONAL AUDIO COMPONENTS
• Equalizer to tailor the frequency response of the Transducer(s)
tactile sound transducer
3
REQUIRED TOOLS AND MATERIALS
Depending on your application, you will need
some or all of these tools and materials for
installation:
• #2 Phillips Screwdriver
• (2) 9/16" Open-Ended Wrenches
• Drill
• Saw
• Wire Stripper
• Soldering Gun or Wire Nuts
• Adhesive (construction glue)
• Hardwood (oak, maple, ash, etc., not pine or
softwoods) for creating mounting bridges
• Speaker Cable (min. 16 AWG; 12-14 AWG
recommended)
B
I
J
K
L
H
.
www.clarksynthesis.com
1
Connecting to the FRONT Outputs of a surround-sound
processor or receiver
• An optional equalizer allows you to tailor the frequency
response of the Transducer.
TACTILE AMPLIFIER
SPEAKER OUTPUT
Side View
2
Connecting to the LFE/SUB Output of a surround-sound
receiver
3-D View
TACTILE AMPLIFIER
Front View
SPEAKER OUTPUT
M
www.clarksynthesis.com
Wiring & Connections
SURROUND-SOUND PROCESSOR OR RECEIVER
OUTPUTS
AUDIO IN
FRONT
CENTER
SURROUND
SUB/LFE
OUTPUT
INPUT
EQUALIZER (RECOMMENDED OPTION)
SURROUND-SOUND RECEIVER
AUDIO IN
SUB/LFE
SPLITTER 1
SPLITTER 2
NOTE: If you are using a
surround-sound receiver
SPLIT TO
with built-in amplifiers,
EXTERNAL
AMPLIFIER
you DO NOT need to split
IF APPLICABLE
the FRONT output as
shown in this diagram.
TO INPUT OF
POWERED
SUBWOOFER
tactile sound transducer
12
Печатать страницу