Blackberry Q10 Информация о безопасности и продукции - Страница 3

Просмотреть онлайн или скачать pdf Информация о безопасности и продукции для Сотовый телефон Blackberry Q10. Blackberry Q10 3 страницы. T-mobile
Также для Blackberry Q10: Информация о безопасности и продукции (4 страниц), Начать (37 страниц), Быстрый старт (4 страниц), Начните здесь (3 страниц), Информация о безопасности и продукции (4 страниц), Руководство по эксплуатации (23 страниц), Информация о безопасности и продукции (4 страниц), Информация о безопасности и продукции (3 страниц), Информация о безопасности и продукции (3 страниц)

Печатать страницу

Blackberry Q10 Информация о безопасности и продукции

Specific absorption rate data

THIS WIRELESS DEVICE MODEL MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO RADIO

WAVES WHEN USED AS DIRECTED IN THIS SECTION.

The BlackBerry smartphone is a radio transmitter and receiver. It is designed and manufactured not to

exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications

Commission (FCC) of the U.S. Government and Industry Canada (IC) of the Canadian Government when

used as directed in the previous section. These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The guidelines are based on standards that were

developed by independent scientific organizations through periodic and thorough evaluation of scientific

studies.

The exposure standard for wireless devices employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC/IC is 1.6W/kg*. Tests for SAR are conducted using

standard operating positions specified by the FCC/IC with the device transmitting at its highest certified

power level in all tested frequency bands. Although the SAR is determined at the highest certified power

level, the actual SAR level of the device while operating can be well below the maximum value. This is

because the device is designed to operate at multiple power levels so as to use only the power required to

reach the network. In general, the closer you are to a wireless base station antenna, the lower the power

output.

Before a wireless device model is available for sale to the public, it must be tested and certified to the FCC

and IC that it does not exceed the limit established by the government-adopted requirement for safe

exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body)

as required by the FCC and IC for each model.

The highest SAR value for your BlackBerry smartphone model when tested for use at the ear is outlined as

follows:

Smartphone

BlackBerry Q10 SQN100-4 smartphone (model number

RFQ111LW)

The highest reported body SAR value for this BlackBerry smartphone when clipped on a belt, in a Research

In Motion approved holster equipped with an integrated belt clip, is outlined below. Carrying solutions,

including RIM approved carrying solutions and carrying solutions not approved by RIM, that do not come

equipped with an integrated belt clip SHOULD NOT be worn or carried on the body. For more information

regarding the wearing or carrying of this BlackBerry smartphone without using a RIM approved carrying

solution equipped with an integrated belt clip, see the holster information in the "Accessories" section of

this document.

Smartphone

BlackBerry Q10 SQN100-4 smartphone (model number

RFQ111LW)

If your BlackBerry smartphone operates in Mobile Hotspot mode, the highest reported body SAR value for

this BlackBerry smartphone when clipped on a belt, in a Research In Motion approved holster equipped

with an integrated belt clip, is outlined below.

Smartphone

BlackBerry Q10 SQN100-4 smartphone (model

number RFQ111LW)

Body-worn measurements differ among wireless device and phone models, depending upon available

accessories and FCC and IC requirements.

The FCC has granted an Equipment Authorization for this wireless device model with all reported SAR levels

evaluated as in compliance with the FCC radio frequency emission guidelines when the BlackBerry

smartphone is used as directed in this section. SAR information on this wireless device model is on file with

the FCC and can be found under the Display Grant section of

FCC ID for your BlackBerry smartphone listed below.

Smartphone

BlackBerry Q10 SQN100-4 smartphone (model

number RFQ111LW)

Additional information on SAR can be found on the CTIA - The Wireless Association website at

www.ctia.org.

___________________________________

* In the United States and Canada, the SAR limit for mobile devices used by the public is 1.6W/kg averaged

over 1 g of tissue for the body or head (4.0W/kg averaged over 10 g of tissue for the extremities - hands,

wrists, ankles, and feet).

FCC compliance statement (United States)

FCC Class B Part 15

This smartphone complies with Part 15 of the Federal Communications Commission (FCC) Rules.

Operation is subject to the following two conditions:

•

This smartphone may not cause harmful interference.

•

This smartphone must accept any interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the manufacturer's instructions, may cause

interference harmful to radio communications.

There is no guarantee, however, that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning on

and turning off the equipment, the user is encouraged to try to correct the interference by one or more of

the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio or TV technician for help.

US Information Concerning the Federal Communications

Commission ("FCC") Requirements for Hearing Aid Compatibility

with Wireless Devices

When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users

may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to

this interference, and wireless devices also vary in the amount of interference that they generate.

The wireless telephone industry has developed ratings to assist hearing device users in finding wireless

devices that may be compatible with their hearing devices. Not all wireless devices have been rated.

Wireless devices that are rated will have the rating displayed on the box together with other relevant

approval markings.

The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If

your hearing device is vulnerable to interference, you may not be able to use a rated wireless device

successfully.

Consulting with your hearing health professional and testing the wireless device with your hearing device is

the best way to evaluate it for your personal needs.

This BlackBerry smartphone has been tested and rated for use with hearing aids for some of the wireless

technologies that the BlackBerry smartphone uses. However, other wireless technologies may be used in

this BlackBerry smartphone that have not been tested for use with hearing aids. It is important to try the

different features of your BlackBerry smartphone thoroughly and in different locations to determine if you

hear any interfering noise when using this BlackBerry smartphone with your hearing aid or cochlear

implant. Consult your wireless service provider about its return and exchange policies and for information

about hearing aid compatibility.

How the ratings work

M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less

interference to hearing devices than wireless devices that are not labeled. M4 is the better or higher of the

two ratings.

T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a

hearing device's telecoil ("T Switch" or "Telephone Switch") than unrated wireless devices. T4 is the better

or higher of the two ratings. (Note that not all hearing devices have telecoils in them.)

SAR (W/kg) for 1 g

1.01

SAR (W/kg) for 1 g

0.68

SAR (W/kg) for 1 g

1.16

www.fcc.gov/oet/ea

after searching for the

FCC ID

L6ARFQ110LW

Hearing devices may also be measured for immunity to this type of interference. Your hearing device

manufacturer or hearing health professional may help you find results for your hearing device. The more

immune your hearing aid is, the less likely you are to experience interference noise from wireless devices.

For more information about the actions that the FCC has taken with regard to hearing aid compatibility with

wireless devices and other steps that the FCC has taken to ensure that individuals with disabilities have

access to telecommunications services, visit www.fcc.gov/cgb/dro.

Industry Canada certification

This smartphone complies with Industry Canada license-exempt RSS standard(s). Operation is subject to

the following conditions:

•

This smartphone may not cause interference.

•

This smartphone must accept any interference, including interference that may cause undesired

operation of the smartphone.

The BlackBerry Q10 SQN100-4 smartphone (model number RFQ111LW) complies with Industry Canada

RSS 102, RSS 132, RSS 133, RSS-GEN, and RSS 210 under certification number 2503A-RFQ110LW.

The BlackBerry smartphone for operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

The maximum antenna gain permitted for BlackBerry smartphones in the bands 5250-5350 MHz and

5470-5725 MHz shall comply with the EIRP limit.

The maximum antenna gain permitted for BlackBerry smartphones in the band 5725-5825 MHz shall

comply with the EIRP limits specified for point-to-point and non point-to-point operation as appropriate.

Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands

5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to

LE-LAN smartphones.

Class B compliance

This BlackBerry smartphone complies with the Class B limits for radio noise emissions as set out in the

interference-causing equipment standard entitled "Information Technology Equipment (ITE) – Limits and

methods of measurement," ICES-003 of Industry Canada.

Additional regulatory conformance

Specific details about compliance to the standards and regulatory bodies for your BlackBerry smartphone

may be obtained from Research In Motion.

For additional Type Approval information please view the Regulatory Approvals drop-down list on the About

screen on your smartphone.

Product information: BlackBerry Q10 SQN100-4 Smartphone

Mechanical properties:

•

Weight: approximately 4.9 oz (139 g) including lithium-ion cell battery

•

Size (L x W x H): 4.7 x 2.6 x 0.4 in. (119.6 x 66.8 x 10.35 mm)

•

2 GB RAM, 16 GB flash memory, micro SD card slot

Power specifications:

•

Removable, rechargeable lithium-ion cell battery

•

Supports 3V, 1.8V micro SIM cards

•

Port compatibility for data synchronization and charging: micro USB 2.0

Mobile network radio specifications:

•

Single-band LTE support: LTE 1900 MHz band

•

Dual-band CDMA support: Cell band 800, PCS 1900 MHz

•

Quad-band GSM support: GSM 850, GSM 900, DCS 1800, PCS 1900 MHz

•

Quad-band UMTS support: UMTS 800/UMTS 850, UMTS 900, UMTS 1900, UMTS 2100 MHz

band

•

Power class: Class 1 (DCS 1800, PCS 1900), Class 4 (GSM 850) as defined in GSM 5.05, Class 4

(GSM 900) as defined in GSM 02.06, Class E2 (GSM 850, GSM 900, DCS 1800, PCS 1900), Class

3 (UMTS, LTE, CDMA Cell band 850), Class 2 (CDMA PCS band 1900)

•

Transmitting frequency: CDMA 824 to 849 MHz, GSM 824 to 849 MHz, GSM 880 to 915 MHz,

DCS 1710 to 1785 MHz, PCS 1850 to 1910 MHz, UMTS 1920 to 1980, LTE 1850 to 1915 MHz

•

Receiving frequency: CDMA 869 to 894 MHz, GSM 869 to 894 MHz, GSM 925 to 960 MHz, DCS

1805 to 1880 MHz, PCS 1930 to 1990 MHz, UMTS 2110 to 2170, LTE 1930 to 1995

Wi-Fi network radio specifications:

•

Wireless LAN standard: IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

•

Transmitting and receiving frequency for IEEE 802.11b/IEEE 802.11g/IEEE 802.11n: 2.412 to

2.472 GHz

•

Transmitting and receiving frequency for IEEE 802.11a/IEEE 802.11n: 5.180 to 5.825 GHz

Bluetooth radio specifications:

•

Single-band support: ISM 2.4 GHz

•

Transmitting and receiving frequency: 2402 to 2480 MHz

•

Bluetooth Class 1

If your smartphone supports NFC technology, the following specifications apply:

•

Operating frequency: 13.56 MHz

•

Supported modes: reader/writer, card emulation, peer-to-peer

Legal notice

related trademarks, names and logos are the property of Research In Motion Limited and are registered

and/or used in the U.S. and countries around the world. ANSI is a trademark of the American National

Standards Institute. Bluetooth is a trademark of Bluetooth SIG. CDMA2000 is a trademark of the

Telecommunications Industry Association. CTIA - The Wireless Association is a trademark of CTIA - The

Wireless Association. GSM is a trademark of the GSM MOU Association. IEEE, 802.11a, 802.11b, 802.11g,

802.11n, and IEEE Std 1725 are trademarks of the Institute of Electrical and Electronics Engineers, Inc.

LTE and UMTS are trademarks of European Telecommunications Standards Institute (ETSI). Qualcomm is a

trademark of Qualcomm Incorporated. Wi-Fi is a trademark of the Wi-Fi Alliance. All other trademarks are

the property of their respective owners. This documentation including all documentation incorporated by

reference herein such as documentation provided or made available at

provided "as is" and without condition, endorsement, guarantee, representation or warranty, or liability of

any kind by Research In Motion Limited and its affiliated companies, all of which are expressly disclaimed

to the maximum extent permitted by applicable law in your jurisdiction.

The terms of use of any RIM product or service are set out in a separate license or other agreement with

RIM applicable thereto. NOTHING IN THIS DOCUMENTATION IS INTENDED TO SUPERSEDE ANY

EXPRESS WRITTEN AGREEMENTS OR WARRANTIES PROVIDED BY RIM FOR PORTIONS OF ANY RIM

PRODUCT OR SERVICE OTHER THAN THIS DOCUMENTATION.

Research In Motion Limited

295 Phillip Street

Waterloo, ON N2L 3W8

Canada

Research In Motion UK Limited

200 Bath Road

Slough, Berkshire SL1 3XE

United Kingdom

Published in Canada

, RIM

, Research In Motion

, and