Caliber 35460 Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики Caliber 35460. Caliber 35460 14 страниц. Snap lock in-wall/in-ceiling speakers

Печатать страницу

SPEAKER REMOVAL

Perform the following steps to remove the speaker from its installed location.

1. Pull the edge of the magnetic speaker grille to remove it from the speaker frame.

2. Insert the 6mm hex wrench end (labeled detach) of the included L-shaped

installation tool into each hole on the speaker frame. Turn it counterclockwise until

the spring loaded tab snaps into place.

3. The speaker can now be removed from its installation hole.

HIGH-FREQUENCY ROLL-OFF

This speaker is equipped with a high-frequency roll-off option, which can be used to

attenuate the high-frequency response. If the speaker sounds too "bright", perform the

following steps to set the high-frequency roll-off.

1. Pull the edge of the magnetic speaker grille to remove it from the speaker frame.

2. Slide the high-frequency roll-off switch to the -3dB or -6dB position. The default is

0dB (no attenuation).

3. Replace the grille onto the speaker frame.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any

questions you may have about installation, setup, troubleshooting, or product

recommendations. If you ever need assistance with your new product, please come online

to talk to one of our friendly and knowledgeable Tech Support Associates. Technical

support is available through the online chat button on our website www.monoprice.com

during regular business hours, 7 days a week. You can also get assistance through email by

sending a message to [email protected]