Clarke 3400771 Инструкции пользователя - Страница 7
Просмотреть онлайн или скачать pdf Инструкции пользователя для Электроинструмент Clarke 3400771. Clarke 3400771 17 страниц. Plastic stapler/welder kit
Печатать страницуELECTRICAL CONNECTIONS
WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY
BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,
for connection to a standard, domestic electrical supply. Should the plug
need changing, make sure that a plug of identical specification is used.
WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:
BLUE = NEUTRAL
If the colours of the wires in the power cable do not correspond with the
markings on the terminals of your plug, proceed as follows.
• Connect the blue wire
to the terminal which
is marked N.
• Connect the brown
wire to the terminal
which is marked L.
• Connect the yellow
and green wire to the
terminal which is
marked E or
• See the specification
table for the correct
fuse size.
This is a Class II product with a functional earth.
If you are not sure, consult a qualified electrician. DO NOT try to do any
repairs.
AN APPROVED RESIDUAL CURRENT DEVICE (RCD) WHICH HAS A TRIPPING
CURRENT OF LESS THAN 30MA MUST BE USED.
EXTENSION CABLES
Always use an approved cable extension suitable for the power rating of this
tool (see specifications), the conductor size should also be at least the same
size as that on the machine or larger.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BROWN = LIVE
Plug must be BS1363/A approved.
Earth
(Green and
Yellow)
Neutral
(Blue)
.
7
YELLOW AND GREEN = EARTH
make sure that the outer sheath of
the cable is firmly held by the clamp
Live
(Brown)