Clarke 7640130 Руководство по эксплуатации и техническому обслуживанию - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Электроинструмент Clarke 7640130. Clarke 7640130 20 страниц. Pressurised sandblaster
Печатать страницу
CLEANING/REPLACING
1.
Press the release catch and
unscrew the condensation
chamber, see Fig 18.
2.
Unscrew the filter as shown in Fig
19 and wipe clean.
NOTE: Do not use harsh or abrasive
chemicals when cleaning
the condensation chamber.
3. Refit the condensation chamber.
REPLACING THE NOZZLE
NOTE: ONLY use identical replacement parts when servicing.
After l0-l2 hours of blasting time the nozzle should be checked for wear. The
nozzle will wear out over time and should be replaced when the hole is no
longer round or the abrasive media does not flow smoothly through. To
replace the nozzle:
1. Disconnect the sandblasting gun from the air hose.
2. Unscrew the nozzle adapter (38), located at the front of the sandblasting
gun.
3. Remove the old nozzle (37).
4. lnsert new nozzle.
• A pack of 4 Replacement nozzles are available from your Clarke
dealer Part number 7640132.
5. Replace the nozzle adapter (38) and firmly screw it onto sandblasting gun.
• Keep your sandblaster clean and protect it from damage.
• Check for worn abrasive hose and fittings. Watch for leaks, blistering,
bulging or thinning of the hose.
• Replace any parts which appear worn.
Fig 19
13
Fig 18