ALDI 55902 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Сверло ALDI 55902. ALDI 55902 19 страниц. Cordless drill driver kit 20v lithium-ion battery
Печатать страницуCordless Drill Driver Kit · 20v Lithium-Ion Battery
6. Do not allow gasoline, oils, petroleum based products, etc. to come in contact with plastic
parts. These materials contain chemicals that can damage, weaken, or destroy plastic.
7. Always wait until the machine has come to a complete stop before placing it down. The
tool insert can jam and lead to loss of control over the power tool.
8. Always set the direction-of-rotation switch to the center (locked) position before per-
forming any kind of work on the machine (e.g., maintenance, tool change, etc.) and when
transporting and storing it.
Unintentional activation of the On/Off switch may result in personal injury.
9. Do not open the battery. There is risk of a short circuit.
10. Protect the battery from heat and fire. There is risk of explosion.
11. Wear ear protectors when using the cordless drill/driver. Exposure to noise can cause
hearing loss.
12. Use protective gloves when removing the bit from the tool, or first allow the clamp to cool
down. The bit may be hot after prolonged use.
13. Use protective gloves when operating the tool. Protective gloves can help to keep you
from being burnt and hurt.
14. Keep your hands away from the motor housing vents. Hot gas comes from the vents
during operation.
15. Release the trigger immediately when a screw is tightened to avoid breaking the screw.
16. For best results, your battery tool should be charged in a location where the temperature
is more than 41°F (5°C) but less than 122°F (50°C). Do not store outside or in vehicles.
DANGER! People with electronic devices, such as pacemakers, should consult
their physician(s) before using this product. Operation of electrical equipment in
close proximity to a heart pacemaker could cause interference or failure of the
pacemaker.
WARNING! Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contain chemicals known to the state of California to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To re-
duce your exposure to these chemicals: work in a well-ventilated area, and work with approved
safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
9
Safety Instructions
AFTER SALES SUPPORT
1866 902 9690