Clarke CTIDG2 Руководство по эксплуатации и техническому обслуживанию - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Электроинструмент Clarke CTIDG2. Clarke CTIDG2 13 страниц. Digital tyre inflator
Печатать страницу
OPERATION
Under or over inflated tyres are dangerous. Consult the vehicle owners
handbook before using this tyre inflator. Never exceed the maximum pressure
of the tyre.
1. Remove the dust cap from the tyre valve and check that the tyre valve is
clean before connecting.
2. Push the connector fully home onto the tyre valve. If the valve leaks, the
connector may need repositioning. Correct position is confirmed by a
steady reading on the gauge.
3. When connected correctly, the display will show the current pressure in the
tyre. If this is the correct tyre pressure as stated in your vehicle handbook,
remove the valve connector.
4. Check the tyre pressure on the display.
5. Depress the trigger to inflate the tyre. Re-check the tyre pressure. Note that
when the trigger is depressed, the gauge will show the airline pressure, not
the tyre pressure.
6. To deflate the tyre, partially depress the trigger and check the pressure
again.
7. When the tyre pressure is correct, remove the connector. Replace the dust
cap on the tyre valve.
IMPORTANT: The air pressure gauge on this product is for guidance only. It is
important that you check the pressure with an approved, calibrated
gauge.
8. DO NOT use damaged or leaking hoses. Occasionally clean the product
and lubricate the trigger parts if required.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7