Clarke DHC-2 Руководство по эксплуатации и техническому обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Электроинструмент Clarke DHC-2. Clarke DHC-2 9 страниц. Double headed metal nibbler
Печатать страницу
BEFORE USE
FITTING THE HANDLE TO THE METAL NIBBLER
1.
Screw the handle over one
of the cutter guides as
shown
FITTING THE METAL NIBBLER TO THE DRILL
1.
Slide the nibbler drive
spindle into the drill.
•
The drill should have a
speed rating of 1500-
3000 rpm.
2.
Tighten the drill chuck.
LOCKING/LOOSENING THE CUTTER GUIDE
Turn the cutter guide locking
bolt clockwise to lock the
cutter guide into position
and anticlockwise to allow
the cutter guide to rotate
freely.
•
For straight cuts, lock
the cutter guide into
position.
•
For curved cuts allow the cutter guide to rotate freely.
Only loosen the cutter guide locking bolt enough to allow the cutter
guide to rotate freely, if you loosen it too much the cutter guide will fall
off.
Fig. 1
Fig. 2
Fig. 3
5