Directed DIRECTECHS CHRYSLER10 Руководство по установке - Страница 7
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильная сигнализация Directed DIRECTECHS CHRYSLER10. Directed DIRECTECHS CHRYSLER10 19 страниц.
Печатать страницу
Analog harness (H3), 18-pin white connector
Conn./Pin
Color
H3/1
Lt. Blue/Red
H3/2
Black/White
H3/3
Gray
H3/4
N/A
H3/5
Gray/Black
H3/6
Violet/White
H3/7
Dark Blue
H3/8
Brown/Black
H3/9
Red/White
H3/10
White/Green
H3/11
Yellow/Green
H3/12
Blue/Red
H3/13
Light Blue
H3/14
Pink/Yellow
H3/15
Dark Green
H3/16
Brown/White
H3/17
Brown
H3/18
Blue/White
MC501 harness (H4), 8 thick-gauge wires (optional)
Conn./Pin
Color
H4/1
Pink/White
H4/2
Red/White
H4/3
Pink
H4/4
Red
H4/5
Orange
H4/6
Red
H4/7
Green
H4/8
Violet
1.
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
2.
These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide" on page 4 for a
list of compatible features.
7
Description
No Connection
(-) Parking Brake Input (manual transmission)
(-) Hood Input
2
No Connection
(+) Glow Plug Input
2
(AC) Tach Input
2
No Connection
1
(-) Horn
1
No Connection
1
(-) Door Input
2
(+) Door Input
2
No Connection
(-) Trunk Trigger Input
2
(-) Activation (start) Input
No Connection
1
(+) Brake Input
2
(+) Siren Output
1
(-) Ground When Running (status) Output
Description
(+) Ignition 2/Flex Relay Output
3
(+) Fused (30A) Ignition 2/Flex Relay Input
(+) Ignition Output (also input to Yellow in ribbon cable)
(+) 12 Volt (battery) Input
(+) Accessory Output
(+) 12 Volt (battery) Input
Starter Input (from key switch)
4
(+) Starter Output (to starter)
2
1
Directed Digital Solutions CHRYSLER10
© 2020-03-09 Directed. All rights reserved.