Clarke SB30 Инструкции пользователя - Страница 3

Просмотреть онлайн или скачать pdf Инструкции пользователя для Электроинструмент Clarke SB30. Clarke SB30 13 страниц. Sand blast cabinet

DESCRIPTION

The cabinet is lit by a low voltage (12 volt) fluorescent tube, fed from a plug-in

type transformer. The switchbox is mounted on the left side of the cabinet. The

transformer should be plugged directly into the mains supply and connected

to the switchbox which contains the ON/OFF rocker switch.

A vacuum extraction device must be used, connected to the port in the left

side of the cabinet.

At the rear of the cabinet is a breather, which must be clear at all times.

The cabinet is provided with a window, the inside of which is protected by a

clear plastic membrane. The protective membrane may be renewed quickly

and easily should it become damaged by the sand blast action.

A variety of abrasive nozzles is supplied with the unit to produce a useful range

of power and grit densities to satisfy all requirements. The cabinet is designed

for use with dry abrasives ONLY. We recommend Aluminium Oxide (for

cleaning steel) and Glass Beads (for cleaning aluminium).

It is necessary to provide a clean, dry air supply, capable of delivering a

minimum of 10 cuft/min at a maximum 100psi. Please consult your air

compressor manual, ensuring you comply with all safety precautions

regarding the use of air compressors, and observe all necessary precautions

when using compressed air.

If an air compressor is used, ensure it is located well away from the cabinet.

SAFETY PRECAUTIONS

Ensure you comply with all precautions regarding the use of air compressors

and compressed air.

• Ensure all air connections are secure.

• Do not use the machine if the integral gloves are ripped or unserviceable.

• Keep the jet well away from the air hose, gloves, florescent tube & window.

• Ensure the clear plastic lid is firmly secured before pressing the trigger.

ALWAYS wear safety glasses. (Normal eye glasses are NOT safety glasses).

• Do not use any silica based abrasives with this tool. Silica based abrasives

have been linked to severe respiratory disease. Always use recommended

abrasives. Abrasives used in this unit may be covered by COSHH

Regulations.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]