ALE Coral 144 Руководство по эксплуатации - Страница 17

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Принтер ALE Coral 144. ALE Coral 144 18 страниц.

ALE

3 Printer operation

3.1

While the printer is in operation, it is necessary to replace the empty ink bottles before

the internal reservoirs go empty as well. The printer reservoirs have an optical ink-low

detection mechanism, which will sending warnings just before the reservoirs become empty

: it will turn on the red LEDs on top of the printer, and send an ink-low signal to the

controller. After a configured number of prints, if the ink level is still low in the reservoir,

the controller stops the printing (to avoid defective printings). See the controller manual for

information on configuring the number of prints after the ink-low signal.

To replace the ink bottle, proceed as follows:

remove the empty ink bottle from the printer

–

Using a craft knife (or a sharp blade), cut the round raised plastic dome on the top of

–

the new ink bottle cap (Fig. 14).

Turn the bottle up-side down and push into the reservoir (Fig. 15).

–

3.2

The printer requires a service every year for routine maintenance and inspection (filters, o-

rings replacement, visual inspection...). Please contact your ALE distributor to have your

printer serviced by fully trained staff.

4.1

All parameters can be modified from the "Settings" screen, which can be accessed from

the main screen.

Coral144 Operator Manual

Design • Print • Trace

03/12/2010