ALE TC Series Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Принтер ALE TC Series. ALE TC Series 18 страниц.

There is a red alarm LED on top of the print-head. It starts blinking when the level of

ink is too low in the reservoir, which means that the bottle of ink is empty. Replace it by

following the steps described in

After a configured number of prints, if the ink level is still low in the reservoir, the

controller stops the printing (to avoid defective printings). See the controller manual for

information on configuring the number of prints after the ink-low signal.

When the ink low is detected, the print-head sends an alarm signal to the controller,

which can transfer it to an external device such as a PLC. See controller manual for

details.

2 Start Up

2.1

2.1.1

After unpacking the printer and checking that the contents correspond to your order

and to the delivery note, the first operation will be to set the position of the print-head

on the conveyor. The correct print-head position can be determined using Codex and

its 3D capabilities (Fig. 7). Please refer to the Codex manual for details.

You must know that the system must be adjusted so that the surfaces to be printed