Zanussi FI 4590 T Буклет с инструкциями - Страница 9

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Холодильник Zanussi FI 4590 T. Zanussi FI 4590 T 10 страниц. Refrigerator fi 4590 t

MAINTENANCE

Unplug the appliance before carrying out any

maintenance operation.

Clean the inside with warm water and bicarbonate

of soda.

If you are not using the appliance for any length of

time, the following precautions should be taken:

unplug the appliance; take all food out; defrost and

clean the inside and all the accessories; leave the

door ajar so that air can circulate inside in order to

prevent unpleasant smells forming.

If a fault occurs, check the following before calling

the Servicing Department:

The light does not come on when you open the door.

Check that the bulb is powered. If the electricity

supply is OK, replace the bulb.

The compressor does not work.

Check that it is powered. Check that the thermostat

is in operative mode.

The compressor runs continuously.

The thermostat is set too high.

Traces of water on the bottom of the refrigeration

compartment.

Check that the defrosting water discharge hole is

not obstructed (Fig. 12).

The light inside the refrigerator compartment is

easy to get at through the opening in the light

holder.

If the light does not go on when the door is open,

check that it is screwed into place properly.

If it still does not light up, change the bulb.

The rating is shown on the light bulb cover.

D025

If the fault persists after carrying out the above

checks, call your nearest Servicing Centre.

For quick service it is important when telephoning

to give the number of the model and the serial

number, both of which can be found on the serial

number plate inside at the bottom left of the

appliance.

Fig. 13