Zanussi ZFK 60/30 RM Буклет с инструкциями - Страница 18
Просмотреть онлайн или скачать pdf Буклет с инструкциями для Холодильник Zanussi ZFK 60/30 RM. Zanussi ZFK 60/30 RM 19 страниц. Fridge freezer
Также для Zanussi ZFK 60/30 RM: Буклет с инструкциями (20 страниц)
Печатать страницу
WHAT HAPPENS IF SOMETHING GOES WRONG?
Before contacting your local Zanussi Service Centre, check the following points:
The appliance does not work...
Vibration or abnormal noises...
Traces of water on the bottom
of the fridge compartment...
The light does not come on...
Fridge does not defrost...
Other points to check...
If, after the above checks, there is still a fault, call your local Zanussi Service Centre, whose address can be found in the
accompanying Customer Care Booklet, and can also be found in your local telephone directory under «Z». Please
make sure you give the model and serial number of the appliance. This information can be found on the rating plate
inside the fridge compartment on the left side behind the vegetable drawer, or on the guarantee certificate.
Original spare parts can be purchased from Zanussi Service Centres.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee service calls.
Before contacting your local Zanussi Service Centre, make a note of the model and serial number. This
information can be found on the rating plate situated inside the cabinet behind the bottom fridge/freezer drawer.
SERVICE DETAILS - ADHESIVE LABEL
When you return your guarantee card to Zanussi Ltd., you will receive an Appliance Guarantee and Maintenance
Record Card together with an adhesive label containing the telephone number of your local Zanussi Service
Centre. The label can be stuck to the machine or adjacent furniture.
18
Check that:
There is power at the socket.
Ensure that there is not a power cut by checking the
household lights.
The fuse has not blown.
The air circulation passages are not covered.
The thermostat dial is in the correct position.
The ambient temperature has dropped below +16 C –
switch on the ambient temperature switch.
You may hear faint gurgling or bubbling sounds when the
refrigerant is pumped through the coils of tubing at the rear,
to the cooling plate/evaporator. When the compressor is on,
the refrigerant is being pumped round, and you will hear a
whirring or pulsating noise from the compressor.
A thermostat controls the compressor, and you will hear
a faint "click" when the thermostat cuts in and out.
The defrosting water discharge hole is not obstructed.
The bulb is fitted correctly.
Replace the bulb if it has blown.
The thermostat setting is not too high (see page 10).
Have you turned the thermostat to the correct setting?
Have doors been left open causing the temperature to
rise?
Sometimes the freezer door will be difficult to open
shortly after you have closed it. Don't worry this is due
to pressure difference which will quickly equalise and
allow the door to open normally.
GB