Zanussi ZIC 722 Буклет с инструкциями - Страница 13

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Холодильник Zanussi ZIC 722. Zanussi ZIC 722 13 страниц.
Также для Zanussi ZIC 722: Буклет с инструкциями (11 страниц)

Печатать страницу

Position the runners (A) at the top and bottom of the

inside of the kitchen unit as shown in Fig. and mark

the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3.5x16 mm screws.

Open both the appliance door and that of the kitchen

unit to approx. 90¡. Place the little plates over the

runners. Hold the doors of the appliance and the unit

together and mark the holes.

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little platee over the

runners and screw in the screws provided (3.5x16

mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes. At the end of the procedure, check that the

doors of the appliance and the kitchen unit open

properly.

If the appliance is fixed to the side of the kitchen unit,

simply slacken the screws in the fixing brackets (E),

move the brackets as shown in the figure and re-

tighten the screws.

PR33

8mm

PR34

PR35

D735