Zanussi ZK 25/9 RM Буклет с инструкциями - Страница 11

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Холодильник Zanussi ZK 25/9 RM. Zanussi ZK 25/9 RM 11 страниц.

Changing the opening direction of

the doors

Before carrying out any operations, remove the plug

from the power socket.

To change the opening direction of the door,

proceed as follows:

1. Remove the ventilation grill (D).

2. Unscrew the bottom hinge (E).

3. Remove the freezer door by releasing it from the

middle hinge (H). Unscrew the middle hinge.

4. Remove the fridge door by releasing it from the

top hinge pin (A).

5. Remove the pin and the washer (A+B) from the

top hinge (C), then mount these on the opposite

side, after having removed the plugs which must

be refitted on the other side.

6. Refit the fridge door. Replace the middle hinge to

the left hand side.

7. Replace the freezer door.

8. Screw down the bottom hinge (E) on the opposite

side by using the screws previously removed.

9. Remove the plug (F) from the ventilation grill (D)

and replace it on the opposite side.

10.Re-assemble the ventilation grill (D).

The doors can be aligned by adjusting both the

middle and top hinges.

The middle hinge can be adjusted horizontally, with

the help of a tool, after having slackened the two

screws.

The top hinge is adjusted by slackening the nut with

a 10 mm spanner and then proceeding as shown in

the Figure.

Warning:

After having reversed the opening direction of the

doors check that all the screws are properly

tightened and that the magnetic seal adheres to the

cabinet. If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the

gasket or accelerate this process by heating up the

part involved with a normal hairdrier.

PR19

D419