Zanussi ZT 132-3 Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Холодильник Zanussi ZT 132-3. Zanussi ZT 132-3 6 страниц.
Safety Instructions
Please read these operating instructions carefully before
installing the appliance. These warnings are provided in the
interests of your safety. Ensure you fully understand them
before installing or using the appliance. If you are unsure
about the meaning of these warnings contact the Customer
Care Department.
Domestic Use
¥ The domestic refrigerators and freezers are designed to be used
specifically for the storage of edible foodstuffs only.
¥ Check the appliance for transport damage. Under no
circumstances should a damaged appliance be installed. In the
event of damage please contact your retailer.
¥ This appliance is heavy. The edges and projecting parts of the
cabinet may be sharp. Be careful when moving the cabinet and
always use gloves.
¥ Any electrical work required to install this appliance should be
carried out by a qualified electrician or competent person.
¥ Ensure that the appliance does not stand on the electrical supply
cable.
¥ Do not use electrical appliances inside the appliance
¥ Do not keep carbonated drinks or bottles in the freezer
compartment. The glass bottles may break.
¥ Ice lollies can cause Ôfrost/freezer burnsÕ if consumed straight
from the freezer.
¥ It is dangerous to try and alter the specifications or modify this
product in any way.
¥ Under no circumstances should you attempt to repair the
appliance yourself. Refer to your local Service Centre, and
always insist on genuine spare parts.
Use and Control
Before Use
Wait two hours before connecting the appliance to allow
the oil to flow back in the compressor.
¥ Before using the appliance for the first time, wash the interior
and all internal accessories with lukewarm water and some
neutral soap so as to remove the typical smell of a brand-new
product, then dry thoroughly.
Do not use detergents or abrasive powders, as these
will damage the finish.
¥ Remove safety elements used for transportation.
Starting the appliance
¥ Insert the plug into the wall socket and turn the thermostat knob
clockwise beyond position ÇOÈ (OFF).
¥ Turn the thermostat control to the required setting.
Temperature regulation
The temperature is automatically regulated and can be increased
to achieve a higher temperature (warmer) by rotating the
thermostat knob toward lower settings or reduced (colder) rotating
the knob towards higher settings.
However, the exact setting should be chosen keeping in mind that
the temperature inside the refrigerator depends on:
¥ room temperature;
¥ how often the door is opened;
6
Child Safety
¥ This appliance is designed to be operated by adults only. There
is a risk of suffocation! Keep packaging material away from
children!
¥ In case of disposal of the appliance, cut off the supply cable as
close as possible and make thelock unusable, to prevent
children from closing themselves inside the appliances.
Environment Protection
¥ This appliance does not contain gasses which could damage the
ozone layer, in either its refrigerant circuit or insulation materials.
The appliance shall not be discarded together with the urban
refuse and rubbish. Avoid damaging the cooling unit, especially
at the rear near the heat exchanger. Information on your local
disposal sites may be obtained from your municipal authorities.
¥ The materials used on this appliance marked with the symbol
are recyclable.
¥ the quantity of food stored;
¥ location of appliance.
A medium setting is generally the most suitable.
To stop operation, simply turn the thermostat knob to position ÇOÈ.
Internal Parts
Storage shelves
¥ The shelves can be removed for cleaning.
¥ To permit storage of food packages of various sizes, the shelves
can be placed at different heights.
¥ To remove the internal shelf pull forward until it can be tipped up
or down and removed.
D040
¥ Please do the same in reverse to insert the shelf at a different
height.
The glass shelf above the vegetable drawers and the
bottle shelf should always remain in position, to ensure
correct air circulation.