Zanussi ZTAN14FW0 Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Холодильник Zanussi ZTAN14FW0. Zanussi ZTAN14FW0 21 страница.
Печатать страницу
Overall space required in use
D3
mm
1) the height, width and depth of the appliance in-
cluding the handle, plus the space necessary for
free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum
angle permitting removal of all internal equipment
LOCATION
To ensure appliance's best functionality, you should
not install the appliance in the nearby of the heat
source (oven, stoves, radiators, cookers or hobs) or
in a place with direct sunlight. Make sure that air
can circulate freely around the back of the cabinet.
To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the
minimum distance between the top of the cabinet
shall be maintained. Ideally, however, the appliance
should not be positioned below overhanging wall
units. One or more adjustable feet at the base of
the cabinet ensure that the appliance stands level.
It must be possible to disconnect the
appliance from the mains power
supply. The plug must therefore be
easily accessible after installation.
POSITIONING
This appliance is not intended to be used as a built-
in appliance.
This appliance should be installed in a dry, well
ventilated indoor position.
The correct operation of the appliance can only be
guaranteed within the specified temperature range.
This appliance is intended to be used at ambient
temperature ranging from 10°C to 38°C.
If, due to different installation, proper ventilation
requirements are not respected, the appliance will
function correctly but energy consumption might
increase slightly.
If you have any doubts regarding
where to install the appliance, please
turn to the vendor, to our customer
service or to the nearest Authorised
Service Centre.
If you position the appliance against
the wall, use back spacers provided or
keep the minimum distance indicated
in the "Dimensions" section.
1)
1010
ELECTRICAL CONNECTION
The wires in the mains lead are coloured in
accordance with the following code:
•
A - green and yellow: Earth
•
C - brown: Live
•
D - blue: Neutral
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and yellow to
2. Connect the wire coloured blue to the terminal
CAUTION! If you install the appliance
next to a wall, refer to the
"Dimensions" section to understand
the minimum distance between the
wall and the side of the appliance
where door hinges are to provide
enough space to open the door when
the internal equipment is removed (e.g.
when cleaning).
CAUTION! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
WARNING! This appliance must be
earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
A
B
the terminal marked either with the letter "E" or
by the earth symbol
yellow.
either marked with the letter "N" or coloured
black.
C
D
E
or coloured green and
7