Zanussi 949495305 Руководство пользователя - Страница 25
Просмотреть онлайн или скачать pdf Руководство пользователя для Печь Zanussi 949495305. Zanussi 949495305 29 страниц.
Печатать страницу
When the oven door is clean, install the glass panel in the opposite sequence. The screen-printing
zone must face the inner side of the door. Make sure that after the installation the surface of the glass
panel frame on the screen-printing zones is not rough when you touch it. Make sure that you put the
glass panel in the rubber distance holders.
HOW TO REPLACE: LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the lamp.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The fuse is blown.
The lamp is defective.
Step 3
Put a cloth on the bottom of
the cavity.
Remedy
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
25