Clarke ZX-R Pro Series Руководство по эксплуатации и техническому обслуживанию - Страница 11

USING THE SCRAPER

In scraping mode, the tool can be used to remove materials such as paint,

sealant residues, adhesives, fabrics and vinyl from materials such as wood,

plastic, metal and painted surfaces.

1. Switch the tool on before it

touches the work piece.

2. Adjust the speed control to a

medium/high speed as required.

3. Place the tool on the workpiece,

ensuring the angle of the scraper

blade to the workpiece is correct.

4. Allow the tool to do the work and

do not apply a heavy pressure

which can cut into the surface

and overload the tool.

NOTE: The scraping blade is designed for scraping soft materials from flat

surfaces. Ensure you get the correct angle and only apply light

pressure to avoid cutting the surface.

NOTE: The scraper blade is quite sharp and tends to remove the surface

from soft materials such as timber (acting in a similar way to a chisel).

Great care should therefore be taken when removing coatings from

these types of materials.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]