Zanussi ZOB65301 Руководство пользователя - Страница 21

Просмотреть онлайн или скачать pdf Руководство пользователя для Печь Zanussi ZOB65301. Zanussi ZOB65301 28 страниц.

Zanussi ZOB65301 Руководство пользователя
Problem
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "12.00".
There is no good cooking per-
formance using the True Fan
Cooking PLUS function.
There is no good cooking per-
formance using the True Fan
Cooking PLUS function.
There is no good cooking per-
formance using the True Fan
Cooking PLUS function.
You want to activate the True Fan
Cooking function, but the indica-
tor of the Plus Steam button is
on.
The water in the cavity emboss-
ment does not boil.
The water comes out of the cavity
embossment.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
www.zanussi.com
Possible cause
The fuse is released.
The lamp is defective.
You left the dish in the oven for
too long.
There was a power cut.
You did not activate the True Fan
Cooking PLUS function.
You did not fill the cavity em-
bossment with water.
You did not activate correctly the
True Fan Cooking PLUS function
with the Plus Steam button.
The True Fan Cooking PLUS
function operates.
The temperature is too low.
There is too much water in the
cavity embossment.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
Remedy
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Reset the clock.
Refer to "Activating the True Fan
Cooking PLUS function ".
Refer to "Activating the True Fan
Cooking PLUS function ".
Refer to "Activating the True Fan
Cooking PLUS function ".
Push the Plus Steam button
to stop the True Fan Cooking
PLUS function.
Set the temperature at least to
110 °C.
Refer to "Hints and tips" chapter.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct amount
of water to the cavity emboss-
ment. Refer to the specific proce-
dure.
21