Zanussi ZOHNC2X2 Руководство пользователя - Страница 16

Просмотреть онлайн или скачать pdf Руководство пользователя для Печь Zanussi ZOHNC2X2. Zanussi ZOHNC2X2 25 страниц.

Печатать страницу

NOTES ON CLEANING

Cleaning

Agents

Everyday

Use

Accessories

HOW TO REMOVE: SHELF SUPPORTS

Remove the shelf supports to clean the oven.

Step 1

Turn off the oven and wait until it

is cold.

Step 2

Pull the front of the shelf support

away from the side wall.

Step 3

Pull the rear end of the shelf

support away from the side wall

and remove it.

Step 4

Install the shelf supports in the

opposite sequence.

The retaining pins on the tele-

scopic runners must point to the

front.

HOW TO USE: AQUA CLEAN

This cleaning procedure uses humidity to remove

remaining fat and food particles from the oven.

Step 1

Pour water into the cavity emboss-

ment: 150 ml.

Step 2

Set the function:

Clean the front of the appliance only with a microfibre cloth with warm water and a

mild detergent. Clean and check the door gasket around the frame of the cavity.

Use a cleaning solution to clean metal surfaces.

Clean stains with a mild detergent.

Clean the cavity after each use. Fat accumulation or other residue may cause fire.

Moisture can condense in the appliance or on the door glass panels. To decrease

the condensation, let the appliance work for 10 minutes before cooking. Do not

store the food in the appliance for longer than 20 minutes. Dry the cavity only with

a microfibre cloth after each use.

Clean all accessories after each use and let them dry. Use only a microfibre cloth

with warm water and a mild detergent. Do not clean the accessories in a dishwash-

er.

Do not clean the non-stick accessories using abrasive cleaner or sharp-edged ob-

jects.

Step 3

Set the temperature to 90 °C.

Step 4

Let the oven work for 30 min.

Step 5

Turn off the oven.

Step 6

Wait until the oven is cold. Dry the

cavity with a soft cloth.