Zanussi FE1200 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина Zanussi FE1200. Zanussi FE1200 25 страниц. Washing machine fe 1200

• Duration of washing programme in hours

and minutes, after you have selected a

programme.

While the programme is running (after you have

pressed the START/PAUSE button), the displayed

time value decreases by one unit every minute.

• The machine has stopped with water in the tub,

at the end of a programme with the RINSE HOLD

option: this is indicated by a static zero.

• The machine has completed the programme:

this is indicated by a blinking zero. At the same

time, the door locked light goes out. The zero will

reappear when you switch the machine on, unless

the previous programme has been erased by

means of the RESET button.

Important!

The first time you use the machine, when you

switch it on, it may display a blinking zero and give an

audible warning signal. This is due to the fact that the

machine has performed a washing cycle during the

manufacturer's inspection tests, and this cycle has not

been erased after its completion.

• Delay start, a time value indicated in hours and

selected by means of the relevant button.

The delay time is displayed for 3 seconds, then the

duration of the selected programme reappears.

After you have pressed the START/PAUSE button,

the countdown begins, and the delay time value

decreases by one unit every hour.

You can delay the start of the selected programme

by up to 24 hours in one hour intervals.

• An incorrect option selection has been made:

this is indicated by the message Err when a

function incompatible with the current programme

is selected.

The incorrect selection is also indicated by an

audible warning signal.

• An alarm code indicates a fault in the machine

operation (see chapter "Something not working").