Zanussi DW 920 Буклет с инструкциями - Страница 8

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Посудомоечная машина Zanussi DW 920. Zanussi DW 920 32 страницы. Dishwasher
Также для Zanussi DW 920: Буклет с инструкциями (32 страниц), Буклет с инструкциями (32 страниц)

Печатать страницу

The Electrical Connections

WARNING

THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability shouid this

safety measure not be observed.

If the plug that is fitted to your appliance is not suit¬

able for your socket outlet, it must be cut off and the

appropriate plug fitted.

Remove the fuse from the cut off plug.

The plug should then be disposed of to prevent the

hazard of electric shocks in case it should be

plugged into a 13 Amp socket in another part of your

home.

Please ensure that when the appliance is installed it

easily accessible

for the engineer in the event of a

breakdown.

Important

The wires in the mains lead are colour coded in

accordance with the following code:

Green and Yellow

Earth

Blue

Neutral

Brown

Live

If you fit your own plug, the colours of the wires in the

mains lead of your appliance may not correspond

with the markings identifying the terminals in your

plug, proceed as follows:

The plug moulded onto the lead incorporates a fuse.

For replacement use a 13 Amp BS 1362 fuse. Only

ASTA approved fuses should be used.

The fuse cover/carrier must be replaced in the event

of changing a fuse.

The fuse cover/carrier is the one shown by the

coloured insert at the base of the plug or is the colour

of the inscription at the base of the plug.

The plug must NOT be used if the fuse cover/carrier

is lost.

A replacement cover/carrier must be obtained from

your local Zanussi Service Force Centre whose

address is listed in your local telephone directory

under «Z».

— Connect the green and yellow (earth) wire to the

terminal in the plug which is marked with the letter

green and yellow.

— Connect the blue (neutral) wire to the terminal in

the plug which is marked with the letter «N» or

coloured black.

— Connect the brown (live) wire to the terminal in the

plug which is marked with the letter «L» or

coloured red.