Zanussi ZEE3921I Руководство пользователя - Страница 13
Просмотреть онлайн или скачать pdf Руководство пользователя для Варочная панель Zanussi ZEE3921I. Zanussi ZEE3921I 44 страницы. Solid hotplate hob
Также для Zanussi ZEE3921I: Руководство пользователя (32 страниц), Руководство пользователя (48 страниц)
Печатать страницу
There must be no cut or stray strands of wire
present. The cord clamp must be correctly at-
tached to the outer sheath.
To replace the connection cable use only
H05V2V2-F T90 or equivalent type. Make
sure that the cable section is applicable to the
voltage and the working temperature. The yel-
low/green earth wire (B) must be approximately
2 cm longer than the live and neutral wire (A).
Warning! A cut off plug inserted into a 13
amp socket is a serious safety (shock)
hazard. Ensure that the cut off plug is disposed
of safely.
Important! The replacement of electric cable
must be carried out exclusively by the service
force centre or by personnel with similar
competencies, in accordance with the current
regulations.
Building In
min. 600 mm
min. 650 mm
40-50 mm
55 mm
www.zanussi.com
A
B
490 mm
270 mm
A) supplied seal
B) supplied bracket
Possibilities for insertion
Kitchen unit with door
The panel installed below the hob must be easy
to remove and let an easy access in case a
technical assistance intervention is necessary.
30 mm
a
min 20 mm
60 mm
(max 150 mm)
b
a) Removable panel
b) Space for connections
Kitchen unit with oven
The hob recess dimensions must obey the indi-
cation and the kitchen unit must be equipped
with vents to let a continuous supply of air. The
electrical connection of the hob and the oven
must be installed separately for safety reasons
and to let easy remove oven from the unit.
50 cm
360 cm
B
2
120 cm
180 cm 2
2
A
2
13