Zanussi ZGLR 646 Руководство по эксплуатации и установке - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Варочная панель Zanussi ZGLR 646. Zanussi ZGLR 646 11 страниц.
Также для Zanussi ZGLR 646: Руководство по эксплуатации и установке (12 страниц), Руководство по эксплуатации и установке (12 страниц)
Печатать страницу
Adaptation to different types of gas
! ! ! ! !
Injectors replacement
Remove the pan supports.
•
Remove the burner's caps and crowns.
•
With a socket spanner 7 unscrew and remove the
•
injectors (Fig. 5), and replace them with the ones
required for the type of gas in use (see Table "injectors").
Reassemble the parts, following the same procedure
•
backwards.
Replace the rating label (placed near the gas supply
•
pipe) with the relevant one for the new type of gas
supply. You can find this label in the package of the
injectors supplied with the appliance.
Should the feeding gas pressure be different or variable
compared with the required pressure, an appropriate
pressure adjuster must be fitted on the gas supply pipe,
in compliance with the rules in force.
! ! ! ! !
Adjustment of minimum level
To adjust the minimum level of the burners, proceed as follows:
Light the burner.
•
•
Turn the knob on the minimum position.
•
Remove the knob.
•
With a thin screwdriver, adjust the by-pass screw
(see Fig. 6). If changing from natural gas 20 mbar to
liquid gas, completely tighten the adjustment screw
until a small regular flame is obtained. If changing from
liquid gas to natural gas 20 mbar, undo the by-pass
screw about 1/2 of a turn. If changing from natural gas
20 mbar to natural gas 13 mbar undo the by-pass
screw about 1/4 of a turn. If changing from liquid gas
to natural gas 13 mbar, undo the by-pass screw about
3/4 of a turn.
•
Finally check the flame does not go out when quickly
turning the knob from the maximum position to the
minimum position.
This procedure can easily be carried out, anyhow the hob
has been positioned or built in the working top.
Table: injectors
TYPE
TYPE OF
OF GAS
BURNER
Rapid (large)
NATURAL
Semi-rapid (medium)
GAS
G 20
Auxiliary (small)
Rapid (large)
LPG
Semi-rapid (medium)
(Buthane/
Auxiliary (small)
Propane)
Rapid (large)
NATURAL
Semi-rapid (medium)
GAS
G 20
Auxiliary (small)
* for Russia only.
INJECTORS
NOMINAL
MARKS
POWER
1/100 mm
INPUT
KW
119
3,00
96
2,00
70
1,00
86
2,80
71
2,00
50
1,00
108
2,13
105
1,72
80
0,90
Fig. 5
Fig. 6
By-pass screw
Table: By-pass diameters
Burner
Auxiliary
Semi-rapid
Rapid
REDUCED
NOMINAL
POWER
kW
3
m
0,65
0,286
0,45
0,190
0,33
0,095
0,65
-
0,45
-
0,33
-
0,52
0,210
0,42
0,186
0,30
0,085
Ø By-pass
in 1/100
of mm.
28
32
40
NOMINAL
POWER
PRESSURE
mbar
/h
g/h
-
-
20
-
202
144
28-30/37
72
-
-
13*
-
9