Zanussi ZGS 322 Буклет с инструкциями - Страница 21
Просмотреть онлайн или скачать pdf Буклет с инструкциями для Варочная панель Zanussi ZGS 322. Zanussi ZGS 322 32 страницы. Gas hob
Печатать страницу
— Connect the blue (neutral) wire to the terminal in the plug which is
marked with the letter 'N' or coloured black.
— Connect the brown (live) wire to the terminal in the plug which is
marked with the letter 'L' or coloured red.
Upon completion there must be no cut, or stray strands of wire present and
the cable clamp must be secure over the outer sheath.
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
of safely. . . . .
of safely
of safely
of safely
of safely
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
similar
similar
competencies,
competencies,
similar
similar
similar
competencies,
competencies,
competencies,
regulations.
regulations.
regulations.
regulations.
regulations.
Permanent Connection
Permanent Connection
Permanent Connection
Permanent Connection
Permanent Connection
In the case of a permanent connection, it is necessary that you install a double
pole switch between the hob and the electricity supply (mains), with a
minimum gap of 3 mm between the switch contacts and of a type suitable
for the required load in compliance with the current electric regulations.
The switch must not break the yellow and green earth cable at any point.
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
Wiring diagram
in
in
accordance
accordance
in
in
in
accordance
accordance
accordance
with
with
the
the
current
current
with
with
with
the
the
the
current
current
current
A. IGNITOR SWITCH
B. IGNITOR UNIT
21