Zanussi ZF711W Буклет с инструкциями - Страница 8

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Морозильная камера Zanussi ZF711W. Zanussi ZF711W 20 страниц. Zanussi instruction freezer zf711w

Печатать страницу

1. To Start the Freezer and Thermostat Control

Maintenance and Cleaning

Before any maintenance or cleaning work

is carried out DISCONNECT the appliance

from the ELECTRICITY supply.

Removing the ventilation grille

The ventilation grille can be removed, e.g. to wash

the grille.

Make sure the door is open when removing the

ventilation grille. Unsnap the upper edge of the grille

by pulling outward/downward. Then pull the grille

straight out to completely remove it.

Internal Cleaning

Clean the inside and the accessories with warm

water and bicarbonate of soda (5 ml to 0,5 litre of

water).

Rinse and dry thoroughly.

Do not use detergents, abrasive

powders, high perfumed cleaning

products, wax polishes or cleaning

products containing bleach or alcohol .

Regulary check the door seals and wipe clean to

ensure they are clean and free from debris.

External Cleaning

Wash the outer cabinet with warm soapy water.

Remove the ventilation grille (see the section

"Removing the ventilation grille") and vacuum-clean

under the cabinet. Once or twice a year dust the

condenser (black grille) and the compressor at the

back of the appliance, with a brush or vacuum

cleaner, as an accumulation of dust will affect the

performance of the appliance and cause excessive

electricity consumption.

When moving the cabinet, lift it by

the front edge to avoid scratching

the floor.

To Change the Light Bulb

The light is switched on automatically when the

door is opened. Before replacing the light bulb,

disconnect the power plug from the outlet.

To replace the lamp in the chiller compartment (only

cabinets with two doors), first unscrew the lamp

grille with a screwdriver.

Use a bulb of the same type, E14 socket, maximum

rating of 25 W.

Zanussi 818 15 02--03/3