Zanussi ZFT 710FW Книга инструкций - Страница 11
Просмотреть онлайн или скачать pdf Книга инструкций для Морозильная камера Zanussi ZFT 710FW. Zanussi ZFT 710FW 16 страниц. Freezer zft 710fw
Печатать страницу
Technical Specifications
Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption
Energy class, according to EU Standards
Freezing capacity (kg/24h)
Rising time (h)
Rated current (A)
Weight (kg)
Installing the appliance
Transportation, unpacking
The appliance and the interior fitting are protected for
transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the refriger-
ant to settle.
Waste handling
Packing materials
The materials marked with are reusable.
>PE<
PE= polyethylene
>PS<
PS= polystyrene
>PP<
PP= polypropylene
The packing consists of reusable materials only.
Cleaning
Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml to 0.5
litres of water). Rinse and dry thoroughly.
Do not use detergents, abrasive powders, highly per-
fumed cleaning products, wax polishes or cleaning
products containing bleach or alcohol.
Location
The appliance should be positioned in a well ventilated,
dry room.
Energy use is affected by the ambient temperature.
Ins
tr
uctions f
Ins
tr
uctions f
(kWh/day)
(kWh/year)
or the Ins
t
or the Ins
t
ZFT 710 FW
100
80
595
850
635
0.575
210
A
9
13
0,6
40
The appliance should therefore:
not be installed next to radiators, cookers or other
sources of heat
only be installed at a location where the ambient tem-
perature corresponds to the climate classification, for
which the appliance is designed.
The climate classification can be found on the rating plate.
The following table shows which ambient temperature is
correct for each climate classification:
Climate Classification Ambient Temperature
SN
N
ST
aller
aller
+10 to +32 °C
+16 to +32 °C
+18 to +38 °C
11