Zanussi ZFU 25S Буклет с инструкциями - Страница 4

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Морозильная камера Zanussi ZFU 25S. Zanussi ZFU 25S 12 страниц.

Печатать страницу

USE

Control panel

A. Temperature alarm light

B. Quick-freezing indicator light

C. N/S switch

D. Function indicator light

E. Thermostat knob

Cleaning the interior

Before using the appliance for the first time, wash

the interior and all internal accessories with luke-

warm water and some neutral soap so as to remove

the typical smell of a brand-new product, then dry

thoroughly.

Do not use detergents or abrasive

powders, as these will damage the finish.

This freezer compartment has been marked with

the symbol

, which means that it is

suited to the freezing of fresh foods, the

conservation of frozen foods and the production

of ice-cubes.

Operation

Insert the power supply plug into the nearest wall

socket (the function indicator light (D) will light up

indicating that the freezer is receiving electrical

input.)

Turn the thermostat knob (E) to the right to a

medium setting (the temperature alarm light (A) will

light up).

To turn off the freezer, turn the thermostat knob to

the «

» position.

Temperature regulation

The temperature is automatically regulated and can

be increased to achieve a higher temperature

(warmer) by rotating the thermostat knob toward

lower settings or reduced (colder) rotating the knob

towards higher settings.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

refrigerator depends on:

•

room temperature;

•

how often the door is opened;

•

the quantity of food stored;

•

location of appliance.

A medium setting is generally the most suitable.

Important

If the ambient temperature is high or the

appliance is fully loaded, and the appliance is

set to the lowest temperatures, it may run

continuously causing frost to form on the rear

wall. In this case the dial must be set to a higher

temperature to allow automatic defrosting and

therefore reduced energy consumption.

Fast freezing

For quick-freezing, press the N/S switch (C). The

quick-freezing indicator light (B) will then light up.