Zanussi ZHC 95 ALU Буклет с инструкциями - Страница 5
Просмотреть онлайн или скачать pdf Буклет с инструкциями для Вентиляционная вытяжка Zanussi ZHC 95 ALU. Zanussi ZHC 95 ALU 20 страниц. Cooker hood
Также для Zanussi ZHC 95 ALU: Буклет с инструкциями (20 страниц), Буклет с инструкциями (18 страниц)
Before carrying out any
maintenance or cleaning
isolate the cooker hood from
the mains supply.
Metal grease filters
It is necessary to wash these filters at least every two
months with warm water to which a little washing up
liquid has been added. Their compact size means that
they can be washed in the dishwasher.
Replace the metal grease filters by removing the filter
retaining clips (see below).
Carbon filters
The carbon filters have to be replaced when they are
saturated, they cannot be cleaned and reused. They
should be replaced after approximately 4 months, or
sooner if the hood is used intensively.
To replace the carbon filters, remove the grease filters
and then the carbon filters push inwards on the two
retaining clips (G1) and disengage the security fixing
and remove.
Light
The light consists of 2 x 20W halogen spotlights.
To replace the lights, remove the two screws that lock
the metal ring in place.
Take the spotlight out of the holder by pulling gently.
When replacing, ensure that the screws are firmly
inserted back in place.
MAINTENANCE AND CLEANING
S36_31
The cooker hood must be kept
clean, a build up of grease or fat
can be a fire hazard.
G1
External Cleaning
Any fat deposits should be removed regularly, at least
every two months. Avoid using abrasive or corrosive
cleaning products.
To clean the outside of the cooker hood, use a cloth
dipped in lukewarm water to which a small amount of
washing up liquid has been added.
The inside of the appliance should be cleaned with a
soft cloth or brush dipped in warm soapy water.
5
S36_29
S36_30
G1