Clarke CFP9HND Инструкции по эксплуатации и техническому обслуживанию - Страница 14

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Воздушный компрессор Clarke CFP9HND. Clarke CFP9HND 20 страниц.

Clarke CFP9HND Инструкции по эксплуатации и техническому обслуживанию
Compressor unit runs
on and off load more
frequently than usual.
Compressor unit runs
'on load' when no air is
being used.
Compressor's oil
consumption rising.
Oil in the air delivered.
Oil level rises although
no oil has been put in.
Condensation at outlet
points.
For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
Large amount of condensation
in air receiver.
Leaks in system
Leaks in system.
Too much oil in compressor.
Leaks around crank case.
Working temperature of
compressor too high because of
insufficient cooling.
Cylinder worn.
Intake air filter blocked.
Sump over full.
Cylinder worn.
Intake air filter blocked.
Condensation in oil pump.
Piping installation incorrect.
Compressor taking in air which is
too warm.
or e-mail as follows:
Drain off condensation Regularly
(Every day before use).
Locate leaks (by means of soapy
water) and repair.
Locate leaks (by means of
soapy water) and repair.
Check oil level 2 or 3 minutes after
stopping.
Contact Clarke Service
Department
Increase ventilation to air
compressor.
Contact Clarke Service
Department
Clean or replace
Reduce oil to correct level.
Contact Clarke Service
Department
Clean / Change air filter.
Compressor over dimensioned.
Consult your local dealer.
Obtain better fresh-air supply to
compressor.
- 14 -