Directed SMARTSTART VSM50BT Краткое руководство по установке

Просмотреть онлайн или скачать pdf Краткое руководство по установке для Блок управления Directed SMARTSTART VSM50BT. Directed SMARTSTART VSM50BT 2 страницы. Bluetooth module

Печатать страницу

BLUETOOTH Module

Introduction

This product can be used as a standalone product or in conjunction with an exist-

ing Directed product. It is compatible with most Directed Security, Remote Start and

hybrid systems. This guide also assumes that the user has already downloaded the

bluetooth app to their smartphone, its required for installation testing.

BLUETOOTH Module

First determine whether the system is being installed as a standalone or being con-

nected to an existing product. If being used with an existing product, determine

whether the 8210 RF adapter kit is also required. If the existing product uses 4-pin RF

connectors, you will need the 8210 RF adapter kit. Start with the following installa-

tion procedure then go to the appropriate standalone or existing product procedure

and follow the instructions provided.

Installation Procedure

First, determine an appropriate location for the DSM50BT module such as along the

Programming

Learn

dashboard. It is recommended that you mount the module in the highest unobstructed

LED

Button

position possible. This offers the best signal reception. The harness length and wiring

route through the dashboard may also dictate the position chosen.

Bluetooth Control Module

Note: Do not extend harnesses beyond the manufactured length.

The DSM50BT module comes with a mounting bracket and hardware. Mount this

bracket first using the provided hardware and insert the module into it.

Control Center

Note: Caution should be taken when mounting the bracket due to possible interfer-

ence with existing harnesses or equipment around or behind the mounting position.

Status

Control

Green

White

LED

Button

As a Standalone

Connect the unterminated end of the H1 main harness first using the following

wiring table and diagram.

Connect the H1 connector end to the middle port (white)of the module.

Note: Actual Control Center

H1 Main Harness

may di er to the example

(see wiring table)

shown in diagram

H1 6-pin Harness

Pin #

Wire Color

Connection/Description

Red

+12V

Black

GND

Green

Lock (output 1)

Blue

Unlock (output 2)

White

Start/Stop (output 4)

Pink

Trunk (output 3)

Wiring Diagram for Standalone

Bluetooth Control Module

Side view, Standalone application

Green

White

Black

Not used

H1 Main Harness

(see wiring table)

Quick Reference Install Guide

VSM50BT/DSM50BT/ASM50BT

With an Existing Product

Unplug the existing control center (IVU) cable.

Connect the H2 harness from the green port of the DSM50BT module to the

control center (see note).

Now connect the disconnected end of the control center cable to the black

porton the module (see note).

Terminate only the required loose wires of the H1 main harness first using the

following wiring table and diagram.

Connect the H1 connector end to the white port of the DSM50BT module .

Note: If the supplied cables do not fit the Directed system, then the system requires

Pair

the 8210 RF adapter kit which is sold separately.

Button

H1 6-pin Harness

Pin #

Wire Color

Connection/Description

Red

+12V

Directed

Black

GND

Control Module

Green

Not Connected

Blue

Not Connected

White

Not Connected

Pink

Not Connected

Black

CPU1

Note: Cut unused wires back to harness sleeve to prevent possible shorts.

Note: Actual Control Module may di er

to the example shown in diagram.

Arrow to Control Module does not re ect

Wiring Diagram for use with Existing Product using 6-pin RF connectors

the actual location of this connection

Programming

Control Center

Status

Control

LED

Button

Note: Actual Control Center

may di er to the example

shown in diagram

Optional 8210 RF adapter wiring diagram (if required).

Note: Actual Antenna

Control Center may

differ to the example

shown in diagram.

Original antenna harness

must be used to connect

the antenna in the 8210

Antenna Adapter.

White

Green

White

Green

Learn

Pair

LED

Button

Bluetooth Control Module

Directed

Control Module

Green

White

Black

Note: Actual Control Module may di er

H1 Main Harness

to the example shown in diagram.

(see wiring table)

Arrow to Control Module does not re ect

the actual location of this connection

AstroStart Remote Starter

Antenna/RF

AstroStart

connections:

The green connector on

8210 RF Adapter harness

connect only to AstroStart

Remote Starter XRT, model

RSS-2524.

Other

models

connect to the large white

4-pin connector.

Directed SmartStart

BLuetooth Control Module

8210 - PKE and SmartStart

Bluetooth RF Harness Adapter

Kit

Green

Black

To Pair the Smartphone to the DSM50BT module:

Press and hold the Pair button on the module for ten seconds, continue holding

until the red LED (approximately five seconds) changes to solid blue.

Release the Pair button. The blue LED begins flashing to indicate Pairing mode.

Note: Perform the next steps within sixty seconds or the unit will exit pairing

mode.

Turn on the Bluetooth feature of your cellular device, enter the pairing menu

and select "SmartStartBT- ####" from the available devices list. Each Directed

DSM50BT device has a unique ID.

The Blue LED begins flashing rapidly to indicate successful pairing and connec-

tion between the smartphone and Directed DSM50BT device.

The DSM50BT automatically exits pairing mode when it connects to the smart-

phone, but you can also exit manually at any time by pressing and releasing

the Pair button.

Note: The system can only be connected with one smartphone at a time. If you need

to pair a second phone, turn off Bluetooth on the first phone or move it out of range

before you attempt to pair and connect the second phone.

CPU1

Notes: Bluetooth response time can vary depending on range and proximity

to the vehicle. Operating temperature range: -30°C to + 70°C.

Additional information can be

found at: www.directechs.com

Remote Start or Security Systems

AutoStart Remote Starter

depending on model.

Antenna/RF

XL202: Range Extender

Programming

Button

D2D Port

White

Green

Antenna/RF

LED

Note: Actual modules may di er

from those shown in diagram and

arrows may not re ect actual

connection point.

8210 - PKE and SmartStart

Bluetooth RF Harness Adapter

Kit

Black