Blackberry ITF100-1 Руководство по установке - Страница 11

Просмотреть онлайн или скачать pdf Руководство по установке для Радар Blackberry ITF100-1. Blackberry ITF100-1 28 страниц.
Также для Blackberry ITF100-1: Руководство по установке (35 страниц), Руководство по установке (28 страниц), Руководство по установке (34 страниц), Руководство по установке (35 страниц), Руководство по установке (30 страниц), Руководство по установке (26 страниц), Руководство по установке (25 страниц), Руководство по эксплуатации (35 страниц)

Печатать страницу
BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE
3.4.1 Prepare module for installation—Battery connection
IMPORTANT: Please do not perform the battery connection process until you are
ready to install and associate the BlackBerry Radar modules on your asset. Once
the battery is connected, please complete the module installation and association,
as soon as you can, to conserve battery life.
1. Remove the module from the package and from the plastic bag. Detach the fastener bag
from the end of the module and keep nearby. You will require these screws to complete
the module assembly process.
2. Turning the module bottom side up, grasp the end of the module's inner housing. Pull to
separate the inner housing from the outer housing.
Tip: If you find it difficult to remove the inner housing from the outer housing, you may
insert a tool, such as a screwdriver or long bolt, through the hole in the inner housing.
Grasp the tool and the outer housing, then pull the two housings apart.
FLATBED AND HEAVY EQUIPMENT
11