Clarke 3120193 Инструкции по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Сандер Clarke 3120193. Clarke 3120193 17 страниц. Multi-sander kit
Печатать страницу
GENERAL SAFETY RULES
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - Do not let children handle the tool.
4. Do not use the tool where there are flammable liquids or gases.
PERSONAL SAFETY
1. Stay alert and use common sense - do not operate the air tool when you
are tired or under the influence of alcohol, drugs or medication.
2. Always wear eye protectors when using the tool. Eye protectors must
provide protection from flying particles from the front and the side.
3. Always wear ear protectors when using the air tool.
4. Always wear a dust mask when operating this type of tool.
5. Do not overreach - Keep proper footing and balance at all times.
6. Ensure wrenches are disconnected from the air tool before turning it on. A
wrench left attached to a rotating part of the tool may result in personal
injury.
USE OF AIR POWERED TOOLS
1. Never use oxygen, CO
source of power for the tool.
2. Do not connect the air supply hose with your finger on the trigger.
3. Do not exceed the maximum pressure for the tool of 90 psi / 6.2 bar.
4. Check hoses for leaks or worn condition before use and ensure that all
connections are secure.
5. Do not use the tool for any other purpose than that described in this
manual.
6. Keep the air supply hose away from heat, oil and sharp edges.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
, combustible gases or any type of bottled gas as a
2
3