Aleko HTIO2BLD Руководство по сборке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по сборке для Горячая ванна Aleko HTIO2BLD. Aleko HTIO2BLD 14 страниц. Inflatable spa
Также для Aleko HTIO2BLD: Руководство по сборке (14 страниц)
Печатать страницу
MAINTENANCE
1. Maintaining Spa Water
•
The water should be changed every few days and correct pool chemicals should be used as advised by
the specialized chemical supplier (Do not use calcium-containing chemicals as they can form scale on the
inner heating tube and tank walls. This scale can also damage the electronics inside the control box,
recuding its life).
It is recommended that you keep your water's pH 7.2~7.8, total alkalinity should be 80~120ppm, and free
•
chlorine should be 3~5ppm. Low pH can damage your spa and pump.
•
A test kit should be usd to test yur water chemistry each time before you use your Spa. At least once a
week.
•
Water sanitation is the responsibility of the Spa owner, and can be achieved by regularly adding
approved sanitizer, which will chemically control viruses and bacteria present in the water or brought in
during use.
2. Cleaning the Filter Cartridge
Remove the electrical plug from the mains.
1)
Unscrew the filter cartridge by turning counterclockwise (Fig 1).
2)
Remove the filter cartridge cover (Fig. 2).
3)
The filter cartridge can be rinsed off with a garden hose and reused. However, if the filter cartridge remains
soiled and discolored the filter cartridge should be replaced (Fig.3).
4)
Re-apply filter cartridge cover and attach the filter cartridge to the water inlet by turning clockwise (Fig.4).
3. Spa Repair
If the spa is torn or punctured, use the provided repair patch.
1)
Dry the area to be repaired.
2)
Apply strong adhesive to Repair Patch and then cover the damaged area.
Smooth the surface to remove any air bubbles. Leave to dry for 12 hours.
3)
Fig. 1
Fig. 3
Fig. 2
Fig. 4