Aleko BSW05 Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Игровые наборы и оборудование для детских площадок Aleko BSW05. Aleko BSW05 4 страницы. Double swing and glider playset
Печатать страницу
Figure 1
1
BEFORE ASSEMBLING: Please read and abide by all Safety Guidelines, and confirm all
necessary parts are included by referencing parts list on page 1.
Step 1. Place together the short curved ends of the Left-Hand Top Leg and Right-Hand
Top Leg and insert as one into the Swing side (closest to the 2 sets of vertical holes) of the
Top Bar (Figure 1).
**Always Make sure to place included washers between fastener head or nut and
adjoining swing set components**
Step 2. Place 1 F1 bolt through the BOTTOM side of Top Bar and use included Allen Key
to hold bolt stationary while tightening nut using Spanner (Fig. 2).
Step 3. Repeat the process by inserting the remaining Top Legs into the Glider side
(closest to 2 horizontal holes)
Fig. 2
Step 4. Completely disassemble S1 U-Bolts then place u-shaped bolt through the hole
in the bearing assembly found at the end of the Swing Seat ropes.
Step 5. Tighten open-ended S1 nut down onto u-shaped bolt, place 1 S1 washer on
each end of the bolt and insert into Top Bar through 2 sets of vertical holes on Swing
side. Ensure washer placement between nuts and Top Bar (Fig. 3).
Step 6. Attach S1 cap nuts to U-shaped bolt and tighten down. Repeat for both rope
attachments on either Swing Seat.
S1
1
Rope/swing
bearing
Fig. 3
Remember to attach the
rope/swing bearing to the U-bolt
Fig. 4
NOTE:
Should the rope come off the
rope/swing bearing during
use please replace back on top
of the rope/swing bearing.