Directed Electronics 4103 Series Руководство по установке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильная сигнализация Directed Electronics 4103 Series. Directed Electronics 4103 Series 20 страниц. Remote start with keyless entry; multi-button remote
Также для Directed Electronics 4103 Series: Краткое руководство по установке (2 страниц)
Печатать страницу
Programming system features
The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of
the feature settings using the Control button.
1. Turn the ignition on, then off.
2. Select a Menu. Press and hold the Valet button. The number of LED flashes and horn honks indicates the
menu number. A single LED flash and honk indicates menu 1. Two LED flashes and 2 honks indicates
menu 2.
3. When the desired menu LED flashes and honks are heard, release the Valet button.
4. Select a Feature. Press and release the Valet button the number of times corresponding to the feature you
wish to change. Then press and hold one more time to select the feature. The LED flashes and the horn
honks to indicate which feature is selected.
5. Program the Feature. While holding the Valet button, you can program the feature using the remote
control.
For features with only two options;
For features with more than two options;
horn honks indicating which option is selected.
Once a feature is programmed:
•
Other features can be programmed within the same menu
•
Another menu can be selected
•
The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Valet button the number of times necessary to advance from the feature you just
programmed to the next one you want to program.
2. Then press the Valet button once more and hold it.
To select another menu:
1. Press and hold the Valet button.
2. After 3 seconds, the unit advances to the next menu and the LED flashes and the horn honks, indicating
which menu has been accessed.
The learn routine exits if any of the following occurs:
•
The ignition is turned On
•
There is no activity for 30 seconds
•
The Valet button is pressed too many times
10
= option 1 while
= option 2.
selects the options in ascending order. The LED flashes and the
AUX
AUX
AUX
© 2012 Directed. All rights reserved.