Clarke 7230294 Руководство по эксплуатации и техническому обслуживанию - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Водяной насос Clarke 7230294. Clarke 7230294 17 страниц. High head draining pump
Печатать страницу
INTRODUCTION
Thank you for purchasing this CLARKE submersible pump.
The CLARKE range of submersible pumps are suitable for discharging pools,
ponds, fountains, pits and any waste water drainage. They can handle foul
water containing suspended material as stated in the specification. The
pumps are not suitable for handling inflammable, corrosive, explosive or
dangerous liquids. The pump is water-cooled and does not contain any oil.
High-head pumps are designed to create high water pressure, allowing water
to be pumped to great heights, or over long distances. The 'Pump
Performance Curve' graph shown, displays the characteristics graphically
and describes the relation between the flow-rate and the head for the pump.
The pump is provided with a thermal overload cut-out, so that in the event
that the pump becomes overheated (due to becoming blocked etc) it will
shut off automatically. When the blockage has been cleared, the thermal
cutout will cool down and re-set and the pump can be re-started.
Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.
SPECIFICATIONS
Voltage
Max input power
Output rating
Maximum Head Height
Maximum Depth
Maximum Flow
Maximum Operating Temperature
Maximum solid body size in suspension
Minimum pickup depth
Weight
Cable Length
Ingress protection rating
Dimensions (D x W x H)
Outlet Thread Diameter
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
230V~50Hz
550 W
830 W
20 m
8 m
180 l/min
o
40
C
8 mm
50 mm
14 kg
10 m
IP68
220 x 150 x 385 mm
1¼"BSP (32mm thread)
2