Alemite 8120 Series Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты Alemite 8120 Series. Alemite 8120 Series 6 страниц. Large capacity hose reel
Печатать страницу
SER 8120
1. Apply thread compound to connecting gooseneck (1) and
delivery hose fitting threads (2).
2. Hand thread delivery hose fitting (2) into gooseneck (1).
Figure 6 Large Capacity Hose Reel - Delivery Hose
3. Using a wrench, firmly hold gooseneck (1) while
tightening delivery hose fitting (2).
4. With delivery hose fully extended and control valve
open, charge hose to purge system of gases. When fluid
appears at control valve, close valve. This prevents
flattening of hose and excessive pressure on drum when
fluid supply is reinitialized at a later time.
Replacing the Motor
CAUTION
Before replacing the motor, remove electrical power
and fluid pressure from reel.
1. Loosen (do not remove) bolts (1) securing motor (2) to
reel.
2. Slide motor and remove chain.
3. Remove bolts securing motor.
4. Install replacement motor.
Alemite LLC
To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]
Figure 7 Large Capacity Hose Reel - Motor
Replacing the Chain
CAUTION
Before replacing the chain, remove electrical
power and fluid pressure from reel.
1. Loosen (do not remove) bolts securing motor (2)
to reel.
2. Remove chain master-link.
3. Install replacement chain (1).
4. Adjust chain tension by moving motor. Adjust to
allow between ¼" and ½" play in chain. Over
tensioning results in reduced motor life.
Figure 8 Large Capacity Hose Reel -
Replacing the Chain
4
Large Capacity Hose Reel
Revision (9-11)