Alemite 8595-C Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование Alemite 8595-C. Alemite 8595-C 6 страниц. Fluid evacuation system
Также для Alemite 8595-C: Руководство по обслуживанию и установке (10 страниц)
Печатать страницу
Fluid Evacuation System
Installation
Depending on the type of fl uid to be evacuated,
the Fluid Evacuation System installation and
use must be in accordance with the Flammable
and Combustible Liquids Code (NFPA 30) and
Automotive and Marine Service Station Code
(NFPA 30A) and must comply with all local state
and Federal codes.
Also, the United States Government safety
standards have been adopted under the
Occupational Safety and Health Act. These
standards should be consulted, particularly
the General Standards, Part 1910, and the
Construction Standard, Part 1926.
Owner/Operator Responsibility
It is the owner/operator responsibility to properly
use and maintain this equipment.
The instructions and warnings contained in this
manual shall be read and understood by the
owner/operator prior to operating this equipment.
If an owner/operator does not understand English,
the contents of this manual shall be explained
in the operator's native language to assure the
owner/operator comprehends.
It is the owners/operators responsibility to
maintain the legibility of all warning and
instruction labels.
The owner/operator shall retain this manual
for future reference to important warnings and
installation instructions.
CAUTION
Grounding
To reduce the risk of static electrical
parking, the system must be grounded.
Refer to your local, state, federal electrical
codes for detailed grounding instructions
that are applicable to your area and type
of equipment.
Alemite LLC
WARNING
Failure to heed the following warnings
including failure to ground equipment,
misuse, over pressuring, modifying
parts, evacuating incompatible fl uids,
or using worn or damaged parts, may
result in equipment damage and/or
serious personal injury, fi re, explosion,
or property damage.
• Make sure the pump and all other equipment
used or located in the pumping area are grounded.
.• Do not use the system if any static sparking
or electrical shock occurs. Stop the evacuation
immediately and do not use the system until the
problem is corrected.
• Do not exceed the stated maximum working
pressure of the pump or of the lowest rated
component in your system.
• Do not alter or modify any part of this
equipment.
• Do not attempt to repair or disassemble the
equipment while the system is operating.
• Make sure all connections are securely
tightened before using this equipment.
• Always read and follow the fl uid manufactur-
er's recommendations regarding fl uid compat-
ibility, and the use of protective clothing and
equipment.
• Check all equipment regularly and repair or
replace worn or damaged parts immediately.
• Never place your hand on or near the pump
suction inlet.
5
SER 671044
Initial Release