CTEK CGC Series Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Монитор CTEK CGC Series. CTEK CGC Series 8 страниц.

Печатать страницу

1 General information

The CHARGESTORM® Connected Grid
Central (CGC100) is a load monitor for electric
vehicle charging stations. It can also monitor
other loads at the property during load
balancing. The CGC100 can act as an internet
gateway to Charge Portal, CHARGESTORM®
Connected cloud-based charging portal.
The CGC100 can manage up to 100 loading
outlets.
The CGC100 communicates with charging
stations using an Ethernet connection.
1.1
Purpose
This document explains how to perform
installation and commissioning and how the
product works.
1.2
References
ID
Document
1) Configuration manual CCU, PD_CM_003
2) CHARGESTORM® Connected User
Manual, Pd_UM_00050.5
3) CCU NanoGrid Configuration Manual,
Pd_CM_004
2 Before installation
2.1
Tools
Recommended tools for installation.
•
Screwdriver
•
Stripping pliers
•
Spirit level
•
Drill
•
Mini USB cable
2.2
Material/ equipment
The following materials are also needed to
install the CGC100.
•
CHARGESTORM® Connected or the
CSR100 to be load balanced by the
CGC100 load monitor
CTEK E-Mobility
•
•
•
•
2.3
CGC100 contains the following components:
•
•
•
•
•
•
All the components are mounted on your DIN
rail.
2.4
The CGC100 has the following external
dimensions in mm.
Model
CGC100
Note: it is important to check that the enclosure
door can be opened at the installation site.
2.5
Note the following:
•
www.ctekemobility.com
CGC100 MANUAL
Ethernet switch
Ethernet cables
Screw joints for cable feeds
Screw for wall mounting
Details
Energy meter Carlo Gavazzi, model
EM21, with current transformers
Control board, CCU
Power supply CCU
Fuse 10A
Terminal block for 230VAC
Triangular key for door.
Dimensions
Height
Width
280
600 mm
mm
Installation site
Run the incoming cables (electrical,
Ethernet, transformer cables) through
Depth
450 mm
Page 4 (8)