Clarke WoodWorker CCS1 Инструкции по эксплуатации и техническому обслуживанию - Страница 6

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Пила Clarke WoodWorker CCS1. Clarke WoodWorker CCS1 12 страниц. 185mm circular saw

Печатать страницу

Changing Saw Blade

Note : Item numbers refer to parts list.
Ensure saw is switched off and isolated from the mains supply, by removing the plug from
the socket.
Loosen depth adjusting knob, (see Fig.1) and set to minimum cut depth.
Fig. 1
Using the special wrench, (supplied), hold the blade securely, (see Fig. 2), unscrew
(anticlockwise) and remove, allen screw and washer, (item Nos 53 & 52) with allen key
(supplied), also remove special washer, (item No 51).
Open blade guard fully and remove blade by tilting up and sliding out.
Fit new blade in reverse order, ensure allen screw is tight.
IMPORTANT Ensure correct rotation direction
Fig. 2
It is extremely important that you note the order of all the
washers etc when removing saw blade, in order to refit them
Fig. 1
WARNING
in the right order with new blade.
5