Clarke Woodworker CMS251 Руководство по эксплуатации и техническому обслуживанию - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Пила Clarke Woodworker CMS251. Clarke Woodworker CMS251 19 страниц. Compound mitre saw
Печатать страницу
LEGEND
A Cutting Head Release Lever
B Trigger Switch (ON/OFF)
C Cutting Head Locking Pin
D Table Locking Knob
E
Work Clamp
F
Back Fence
G Table Insert
H Front Mounting Hole
FEATURES
As its' name implies, the machine is a Bevel/Mitre Saw, capable of straight cross
cutting, and cutting bevels and mitres, or a combination of the two.
The main arm, or Cutting Head, carries the motor and the tungsten carbide saw
blade. It is allowed to swivel to produce mitre cuts and tilt to the left to produce
bevel cuts.
The maximum sizes of wood that may be cut in any of these processes is given on
page 17.
A dust extraction port is provided at the rear of the machine to which the dust
bag (Q), is attached. If required, a vacuum extraction device may be used which
will provide fast and efficient removal of sawdust. The extraction device may be
used continuously or intermittently depending upon your requirements.
The Cutting Head is locked in its lower position for transit purposes. To release it,
pull out the Head Locking Pin, (C). It may be necessary to apply slight downward
pressure to the head in order to do so, and allow the head to rise to its upper
position gently, under control.
The head will lock in its upper position, and is prevented from being lowered until
the Head Release Lever (A) is moved sideways.
(Ref. Figs. 1 and 2)
J
Table Release Lever
K Pointer
L
Stabiliser
M Bevel Scale
N Bevel Locking Knob
O Head Return Spring Tension Adjuster
P Cutting Head Stop Screw
Q Dust Bag
9