Clarke WOODWORKER CTS800B Инструкции по эксплуатации и техническому обслуживанию - Страница 4
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Пила Clarke WOODWORKER CTS800B. Clarke WOODWORKER CTS800B 15 страниц. 8” 200mm table saw
Печатать страницу
SAFETY PRECAUTIONS
As with all machinery, there are certain hazards involved with their
operation and use. Exercising respect and caution will considerably
lessen the risk of personal injury. However, if normal safety precautions
are overlooked or ignored, personal injury to the operator or damage to
1.
KNOW YOUR MACHINE. Read this manual carefully. Learn the machines' applications
and limitations, as well as the specific potential hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working order.
3.
ENSURE THE MACHINE IS EARTHED: The machine is equipped with three-pin
plug which should be plugged into a three-hole electrical socket. Never
remove the earth pin.
4.
REMOVE ADJUSTING KEYS AND SPANNERS. Form habit of checking to see that
keys and spanners etc., are removed from the machine before turning it ON.
5.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
6.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power tools or machines
in damp or wet locations, or expose them to rain. Keep work area well lit.
7.
KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a
safe distance from work area.
8.
MAKE WORKSHOP CHILDPROOF - with padlocks, master switches or by
removing starter keys.
9.
DON'T FORCE THE MACHINE. It will do the job better and safer at the rate for
which it was designed.
10. WEAR PROPER APPAREL. Loose clothing, gloves, neckties, rings, bracelets, or
other jewellery may get caught in moving parts. Nonslip footwear is
recommended. Wear protective hair covering to contain long hair.
11. USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty.
Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.
12. USE EAR DEFENDERS.
13. DON'T OVERREACH. Keep proper footing and balance at all times.
14. MAINTAIN TOOLS IN TOP CONDITION. Keep tools sharp and clean for best
and safest performance. Follow instructions for lubricating and changing
accessories.
15. DISCONNECT TOOLS/MACHINES from electrical supply before servicing and
when changing accessories such as blades, bits, cutters, etc.
16. USE RECOMMENDED ACCESSORIES. Consult the manual for recommended
accessories. The use of improper accessories could be hazardous.
17. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the
cutting tool is accidentally contacted.
property may result.
4