Clarke 6926018 Инструкции по эксплуатации и техническому обслуживанию - Страница 9
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Нагреватель Clarke 6926018. Clarke 6926018 17 страниц. Quartz halogen heater
Печатать страницу
NOTE: The angle of tilt MUST NOT exceed 45 degrees downwards, as this
could lead to the heater over-heating. NEVER position the heater
pointing downwards.
4. Switch on the power at the primary switch.
• The neon indicator will illuminate.
5. Set one or both secondary switches to the I (On) position as required.
• The left one controls the upper heating element and the right one
controls the lower.
6. Press the ON/OFF button on the
remote control to switch the
elements on.
• The secondary switches will
each illuminate to show that the
heating element is in use.
• The ambient room temperature
will be displayed.
7. Set the target temperature by
pressing the + and - arrow keys on
the remote control to a value
between 15°C and 45°C.
• During normal operation the bar below the temperature display
pulsates to indicate that the heater is operating.
• When the heater has reached the target room temperature, the bar
will become solid and the heater will automatically turn off. It will
resume working when the ambient temperature falls 2
target temperature.
PROGRAMMING THE TIMER
When programming, note that the selection will only remain actively
displayed for approximately 10 seconds before reverting to the beginning of
the process. If unsure what value you wish to enter, you can maintain the
display by making constant adjustments with the +/- buttons until making your
final selection.
SETTING CURRENT TIME
1. Switch the heater on with the remote control (on/off). The heating
elements can be either on or off.
2. Press the TIME button.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9
o
C below the